Honolulu Auto Repair Directory (Honolulu, Hawaii)

There are many auto parts that make up the vehicle. Of importance are the body parts of the vehicles. In Honolulu car repairs there is much that is done to ensure that Honolulu auto parts are sourced and that you are able to repair your vehicle in the area. This means that the repairs can be completed at a lower cost and without as much inconvenience to you. There are often some jobs that can be completed to the body without the need for new parts and the parts that you have can be repaired and used to fix your vehicle back to perfect condition.

Some minor repairs when it comes to auto body works include repair of small dents as well as the repair of bumpers in some cases. There are many stages in the repair of these two tasks that would be considered minor in terms of auto body works. These repairs are often done to the vehicle in shop and can be completed in a day or two in most cases. There is no need to venture away from the area of Honolulu to complete these repairs. Plastic bumper repairs are easily completed in a few simple steps.

The plastic bumper may have a gash or dent and this can be repaired. The bumper has to be removed from the vehicle as the first stage of the repair. This removal is followed by the preparation of the inner side of the gash/damaged portion. The inner side in order to hold the repair materials has to be prepared. It has to be given some tooth to hold the materials. Due to this the inner side of the bumper has to be sanded to become a bit rough. This can be done manually or by the use of an orbital sander.

The next stage that follows and that will be completed by your Honolulu auto repair personnel will be the application of surface modifier. Repair material is then applied generously. This will assist the reinforcing mesh, which is to be used, to bind to the plastic. This is applied generously and the reinforcing mesh patch is cut to size and the corners rounded. This is placed over the area and worked into the repair material. More repair material can then be applied to the surface and evened out to allow drying. These are simple steps but can take some time.

The next stage entails the repair to the outer surface of the bumper. This entails several stages of sanding to lower the area and feather out the paint. The repair material is then put into the gash and spread evenly. This is followed by sanding and then the use of finishing putty to complete thee repair and handle any minor flaws. This will be followed by the painting of your bumper to match the colour. There are many similar repairs that can be done on other body parts right in the HI car repair center that you select and you do not have to go through a lot of expense.