Oxnard-Thousand Oaks-Ventura Auto Directory -- California Collision Repair Centers

There are several establishments in the CA area that can assist in the repair of your vehicle to showroom condition. These places are second to none and are able to restore your vehicle from the smallest dent to the largest mangling of the body of your vehicle. The CA shop that is chosen does not matter in terms of the size of the establishment but what does matter is the quality of work that they produce. It is essential that the repairs to your vehicle are handled in as professional and competent a manner as possible.

There are two main areas that the work for auto body repairs comes in. These are car restoration and the repair of collision vehicles. These two tend to have equal occurrences on the body repair market. The repairs have to be completed to your vehicle in as unobtrusive a fashion as possible. There are times when you may have a dent on your vehicle that can be dealt with effectively by almost any Oxnard car repair shop in a short period of time. The method for repair is simple to go through and straightforward to comprehend but can require a great deal of patience.

A small depression on a vehicle is simply repaired with the use of the right equipment and tools and the right materials. There are two main types of tools that are used in the repair of dents on vehicles that are not too bad. These are the stud welder and the pull hook. The stud welder is the less invasive of the two pieces of equipment and is one that welds a small nails to the surface of the dent. This then allows the pulling of the dent out without the need for drilling a hole that can affect the integrity of the material. The only problem with this method is the fact that the material is limited to steel and this cannot be used for aluminium. Your Thousand Oaks car repair technician will know the material even if you do not.

The next option is the pull hook that can be used on either steel of aluminium. This is suitable for many areas that stud welding is not applicable and can function well even when the back panel of the vehicle is not easily accessible. The pull hook requires that a hole be drilled and the pull hook used to get rid of the depression. The dent is pulled with the hook and the metal is tapped down at the same time. There is then the next stage in the repair that follows. In dents that are on aluminium there is the use of fibreglass filler with body filler. This is then levelled by sanding and the dent is levelled and then painted over. The use of these two methods is rampant in dent repair and will most probably be used by your Ventura car repair center.

The other work that becomes necessary as mentioned is the painting of your vehicle. The CA car repair places will most likely have these services as well. Whether it is a small dent or more detailed and complex repairs the CA auto repair centers on the market can assist.